Articolo aggiunto al carrello
PASI seismographs can be accompanied with a complete range of 12 or 24-channel seismic cables for refraction/surface reflection. Alternatively, land streamer and customised hydrophonic cables are also available, for quick acquisitions on land, at sea or in wells.
Geophone used in geophysics is sensor designed to detect ground movements or seismic waves. The sensitive element is similar to a microphone, but capable of detecting even very low frequencies (up to 1 or 2 Hz) and transforming the detected signal into an electrical impulse. In fact, an electromagnetic geophone generates a current when the arrival of the seismic wave, artificially produced in the ground by a controlled seismic source or spontaneously produced by a natural or anthropic source, determines the relative motion of a coil inside a magnet.
Starter geophone with connecting cable. The ideal solution for having a perfect trigger and acquisition. Standard cable length is 1m (longer lengths available upon request).
Piezoelectric starter (hammer switch), with cable. Supplied with spare piezoelectrics.
Shielded cable on reel, length 130m, for starter geophone / hammer switch.
Versatile, user friendly instrument, designed to "trigger" the acquisition of the seismograph via radio, transmitting in the free European band 869.4 - 869.65 MHz (free use license - exempt from government taxes).
6kg sledge hammer. Can be used either with a hammer switch (to be fixed to the handle of the hammer as in the photo) or in combination with the starter geophone.
Aluminium striking plate with carrying handle, dim. 20x20x5 cm. Also available in polyzene version (upon request).
Iron/aluminium horizontal wave striking plate.
When energizing with the sledge hammer is no longer sufficient data - to reach the desired exploration depth and explosives cannot be used, this seismic energizer can be the winning solution (for example when you need to acquire seismic reflection data). The Isotta seismic energizer is made up of a stainless steel cylindrical body, with a front section that may be unscrewed (cartridge chamber), suitable to contain an 8-bore blank cartridge, or industrial type, easily found in gun shops. This cartridge chamber is without barrel, thus permitting the axial ejection of the energy wave, caused by the explosion of the cartridge, generating type 'p' (longitudinal) and type 's' (transversal) waves.
The 3D Land Geophone 3DLG-2 is the ideal accessory to add to your seismic instrumentation and perform HVSR, MASW and Vibration Analysis. One vertical and two horizontal high-performing sensors, with 2Hz resonance frequency and properly coupled, are mounted in a robust waterproof case, delivered with adjustable feet and inter-changeable rods.
Borehole 3D Geophone Mod. GFA 50/100 is built with 3 high-sensitivity geophones (nat.freq.10 Hz- 1 vertical and 2 horizontal sensors) oriented according to a triad of orthogonal Cartesian axes XYZ. Supplied with a cleat assembly to sustain its weight at the requested depth (GFA cable is graduated in meters), this borehole geophone has a pneumatic-mechanical clamping system with lateral lever and spacer block.
Available in two versions: GFA-50 with 50m of cable and GFA-100 with 100m of cable.
Specially designed for small-scale crosshole surveys, this compact hammer can be used to generate both P and S waves. The hammer can be loaded down using the steel cable and clamped to the requested depth by a pneumatic clamping system manually controlled by a lever from the surface.
USB GPS antenna; it can be used for geopositioning of an instrument connected to PC (es. GEA24, GEA3, RM-1, Gemini-2) or for synchronization of acquisitions among more instruments (es. 2 or more Gemini-2s).
Gemini-2 option for "active" seismic (requires related accessories).
This accessory allows the trigger synchronization between two separate acquisition units; it's compatible with Gemini-2, GEA3, GEA24.
The P200 energizer is the perfect energy source for VES in direct current. Designed to complete the RM1 earth resistivity meter, the P200 is compatible not only with all PASI previous models (16GL, 16GL-N, etc.), but also with groundwater detector of other brands.
Reels with 100, 200, 300, 500 m cables, cross-section 1 mm.
Reels with 50, 100, 200, 300, 500 m cables, cross-section 1 mm.
Pair of stakes in stainless steel for current electrodes (AB), diam. 15mm, length approx. 500mm.
Pair of stakes in copper for potential electrodes (MN), diam. 22mm, length approx. 500mm.
In microporous porcelain, ideal for self potential measurements (PS). Can be used as MN potential electrodes. Before use, they must be filled with a saturated solution of CuSO4 and topped up as necessary during use.
Pair of 2.5 kg mallets with ergonomic handle, ideal for driving stakes into the ground.
Complete set of cables for VES electrodes ABMN and P-200 energiser.
A very useful tool to test the performance of your earth resistivity meter before a measuring session in the field. Compatible with all PASI earth resistivity meters.
Switching box for managing each group of 16 electrodes. Compatible with both POLARES and RM-1.
For 16 electrodes - standard spacing: 5m (80m length) or 10m (160m length)
1 for each 16 electrodes, starting from 48 electrodes and up. They connect two successive MPX with each other, standard lengths 85 and 170m
Stainless steel stake, length 500mm, diam.10mm, supplied with connecting clip for multielectrode cable (16 electrodes required for each cable)
Adapter to connect RM-1 to a MPX and perform ERT multielectrode profiles.
POLARES adapter for connecting standard AB & MN cables and perform 1D-VES (with 4 electrodes).
The Well-Camera series is complemented with a series of useful accessories that simplify use and ensure the best protection for the camera head.