SEISMIC

ANTEO

      seismic > bedrock, seismic refraction tomography,seismic reflection

ANTEO is the expression of a new philosophy for a modular exploration seismograph, designed for an unlimited number of channels. It consists of a control and display unit (ANTEO CU) connected to one or more special seismic cables (ANTEO AD6-x), each one with no.6x 24 bits A/D converters. These converters can be connected to single-connection standard analogue geophones (all frequencies available).

The signal coming from each geophone is digitalized at 24 bits and directly transmitted to the CU, for display of the seismic traces and the resulting treatment of recorded data. This allows you to obtain the best signal/noise ratio, independently of the geophone cable length and reducing to minimum any environmental disturbances present at the acquisition site.

The ANTEO system can be positioned along a minimum of 6 channels up to an infinite number of channels, simply by adding more AD6-x strings to your initial ANTEO system. For example, a standard 24-channel system is therefore composed of an ANTEO CU unit and 4 AD6-x cables. AD6-X is available with standard and custom spacing to meet any needs.

ANTEO CU has the ability to automatically recognise the arrangement of the AD6-x connected to it and can therefore be positioned anywhere on our modular string of AD6-x. The system is able to test all the in-line geophones, checking their electrical characteristics and ensuring that all the parameters are OK before you begin acquisition. The real time noise monitor function will allow you to choose the best moment to shoot, optimising acquisition results.

  

Type of instrument: seismograph with digitization of the 24 bit signal on each single channel (compatible with any type of analogue geophone, of any frequency)

Number of signals that can be acquired: modular system with unlimited number of channels 

Acquisition interval (standard version): from 0.016 to 62.5 msec

Acquisition length (standard version): 25000 samples (6sec@0.125msec sampling interval)

Preamp gain: 0dB/40dB with automatic adjustment 

A/D converter: 24 bit, Delta-Sigma technology

Bandwidth (Response in Frequency): 30kHz@64KS/s

Operating and storage temperature: -30°C + 80°C


accessories

exploration seismic accessories

VERTICAL GEOPHONES

 

In standard shell, 75mm steel rod, 1m cable terminated with split spring connector (single clip).

FIND OUT MORE    REQUEST A QUOTATION

exploration seismic accessories

RADIO TRIGGER

 

Versatile, user friendly instrument, designed to "trigger" the acquisition of the seismograph via radio, transmitting in the free European band 869.4 - 869.65 MHz (free use license - exempt from government taxes).

FIND OUT MORE    REQUEST A QUOTATION

exploration seismic accessories

STARTER GEOPHONE

 

Starter geophone with connecting cable. The ideal solution for having a perfect trigger and acquisition. 
Standard cable length is 1m (longer lengths available upon request).

REQUEST A QUOTATION

exploration seismic accessories

PIEZOELECTRIC STARTER

 

Piezoelectric starter (hammer switch), with cable. Supplied with spare piezoelectrics.

REQUEST A QUOTATION

exploration seismic accessories

SLEDGE HAMMER

 

6kg sledge hammer. Can be used either with a hammer switch (to be fixed to the handle of the hammer as in the photo) or in combination with the starter geophone.

REQUEST A QUOTATION

exploration seismic accessories

ISOTTA ENERGIZER

 

The Isotta seismic energizer is made up of a stainless steel cylindrical body, with a front section that may be unscrewed (cartridge chamber), suitable to contain an 8-bore blank cartridge, or industrial type, easily found in gun shops).

FIND OUT MORE    REQUEST A QUOTATION

exploration seismic accessories

STRIKING PLATE

 

Aluminium striking plate with carrying handle, dim. 20x20x5 cm.
Also available in polyzene version (upon request).

REQUEST A QUOTATION

exploration seismic accessories

HORIZONTAL WAVE STRIKING PLATE

 

Iron/aluminium horizontal wave striking plate.

REQUEST A QUOTATION

exploration seismic accessories

HORIZONTAL 10HZ GEOPHONE

 

In horizontal shell with bubble level, 75mm steel rod, 1m cable terminated with split spring connector (single clip).
For use on asphalt and rigid surfaces, we recommend using it with a special universal base (to be ordered separately).

REQUEST A QUOTATION

exploration seismic accessories

TRIGGER EXTENSION CABLE

 

Shielded cable on reel, length 130m, for starter geophone / hammer switch.

REQUEST A QUOTATION

accessories

exploration seismic accessories

VERTICAL GEOPHONES

 

In standard shell, 75mm steel rod, 1m cable terminated with split spring connector (single clip).

FIND OUT MORE    REQUEST A QUOTATION

exploration seismic accessories

RADIO TRIGGER

 

Versatile, user friendly instrument, designed to "trigger" the acquisition of the seismograph via radio, transmitting in the free European band 869.4 - 869.65 MHz (free use license - exempt from government taxes).

FIND OUT MORE    REQUEST A QUOTATION

exploration seismic accessories

STARTER GEOPHONE

 

Starter geophone with connecting cable. The ideal solution for having a perfect trigger and acquisition. 
Standard cable length is 1m (longer lengths available upon request).

REQUEST A QUOTATION

exploration seismic accessories

PIEZOELECTRIC STARTER

 

Piezoelectric starter (hammer switch), with cable. Supplied with spare piezoelectrics.

REQUEST A QUOTATION

exploration seismic accessories

SLEDGE HAMMER

 

6kg sledge hammer. Can be used either with a hammer switch (to be fixed to the handle of the hammer as in the photo) or in combination with the starter geophone.

REQUEST A QUOTATION

exploration seismic accessories

ISOTTA ENERGIZER

 

The Isotta seismic energizer is made up of a stainless steel cylindrical body, with a front section that may be unscrewed (cartridge chamber), suitable to contain an 8-bore blank cartridge, or industrial type, easily found in gun shops).

FIND OUT MORE    REQUEST A QUOTATION

exploration seismic accessories

STRIKING PLATE

 

Aluminium striking plate with carrying handle, dim. 20x20x5 cm.
Also available in polyzene version (upon request).

REQUEST A QUOTATION

exploration seismic accessories

HORIZONTAL WAVE STRIKING PLATE

 

Iron/aluminium horizontal wave striking plate.

REQUEST A QUOTATION

exploration seismic accessories

HORIZONTAL 10HZ GEOPHONE

 

In horizontal shell with bubble level, 75mm steel rod, 1m cable terminated with split spring connector (single clip).
For use on asphalt and rigid surfaces, we recommend using it with a special universal base (to be ordered separately).

REQUEST A QUOTATION

exploration seismic accessories

TRIGGER EXTENSION CABLE

 

Shielded cable on reel, length 130m, for starter geophone / hammer switch.

REQUEST A QUOTATION