DO YOU NEED 48 CHANNELS?
can be serialized for a total of 48 channels and connected to the same external PC via the appropriate USB cables (on the PC you need 2 USB ports).GEA24 checks the presence of two systems and identifies them with their serial number. Step by step, the acquisition software will allow you to draw the geometry of the spreading in relation to your seismic cables (12 or 24 channels) and the 1-48 geophone sequence you are using in the field.
The Multitrigger Box - connected to the first GEA24 unit - will guarantee the perfect synchronization of the trigger pulse on all 48 channels. As a complement to your 48-channel system, the PASI Radiotrigger could then become a viable alternative to long trigger extension cables.
PASI seismographs can be accompanied with a complete range of 12 or 24-channel seismic cables for refraction/surface reflection. Alternatively, land streamer and customised hydrophonic cables are also available, for quick acquisitions on land, at sea or in wells.
Geophones used in geophysics are sensors designed to detect ground movements or seismic waves. The sensitive element is similar to a microphone, but capable of detecting even very low frequencies (up to 1 or 2 Hz) and transforming the detected signal into an electrical impulse. In fact, an electromagnetic geophone generates a current when the arrival of the seismic wave, artificially produced in the ground by a controlled seismic source or spontaneously produced by a natural or anthropic source, determines the relative motion of a coil inside a magnet.
The 3D Land Geophone 3DLG-2 is the ideal accessory to add to your seismic instrumentation and perform HVSR, MASW and Vibration Analysis. One vertical and two horizontal high-performing sensors, with 2Hz resonance frequency and properly coupled, are mounted in a robust waterproof case, delivered with adjustable feet and inter-changeable rods.
Borehole 3D Geophone Mod. GFA 50/100 is built with 3 high-sensitivity geophones (nat.freq.10 Hz- 1 vertical and 2 horizontal sensors) oriented according to a triad of orthogonal Cartesian axes XYZ. Supplied with a cleat assembly to sustain its weight at the requested depth (GFA cable is graduated in meters), this borehole geophone has a pneumatic-mechanical clamping system with lateral lever and spacer block.
Available in two versions: GFA-50 with 50m of cable and GFA-100 with 100m of cable.
Specially designed for small-scale crosshole surveys (ASTM 4428), this compact hammer can be used to generate both P and S waves. The hammer can be loaded down using the steel cable and clamped to the requested depth by a pneumatic clamping system manually controlled by a lever from the surface.
Starter geophone with connecting cable. The ideal solution for having a perfect trigger and acquisition.
Standard cable length is 1m (longer lengths available upon request).
Piezoelectric starter (hammer switch), with cable. Supplied with spare piezoelectrics.
Shielded cable on reel, length 130m, for starter geophone / hammer switch.
Versatile, user friendly instrument, designed to "trigger" the acquisition of the seismograph via radio, transmitting in the free European band 869.4 - 869.65 MHz (free use license - exempt from government taxes).
6kg sledge hammer. Can be used either with a hammer switch (to be fixed to the handle of the hammer as in the photo) or in combination with the starter geophone.
Aluminium striking plate with carrying handle, dim. 20x20x5 cm.
Also available in polyzene version (upon request).
Iron/aluminium horizontal wave striking plate.
When energizing with the sledge hammer is no longer sufficient data - to reach the desired exploration depth and explosives cannot be used, this seismic energizer can be the winning solution (for example when you need to acquire seismic reflection data). The Isotta seismic energizer is made up of a stainless steel cylindrical body, with a front section that may be unscrewed (cartridge chamber), suitable to contain an 8-bore blank cartridge, or industrial type, easily found in gun shops. This cartridge chamber is without barrel, thus permitting the axial ejection of the energy wave, caused by the explosion of the cartridge, generating type 'p' (longitudinal) and type 's' (transversal) waves.
This accessory allows the trigger synchronization between two separate acquisition units; it's compatible with Gemini-2, GEA3, GEA24.
USB GPS antenna; it can be used for geopositioning of an instrument connected to PC (es. GEA24, GEA3, RM-1, Gemini-2) or for synchronization of acquisitions among more instruments (es. 2 or more Gemini-2s).
Single acquisition (active and passive):
-from 1 to 6 chs : up to 31.25 microsec/32000 Hz
-from 7 to 12 chs : up to 62.5 microsec/16000 Hz
-from 13 to 24 chs : up to 125 microsec/8000 Hz
Continuous acquisitions (passive):
-from 1 to 3 chs : up to 500 microsec/2000 Hz
-from 4 to 6 chs : up to 1 millisec/1000 Hz
-from 7 to 12 chs : up to 2ms /500 Hz
-from 13 a 24 chs : up to 4ms /250 Hz
Terms and conditions for the use of the site in compliance with the protection of your personal data
We inform you that, pursuant to EU Regulation 679/2016 (below: "Regulation"), your personal data will be processed by P.A.S.I. s.r.l. as data controller ("Data Controller").
The Data Controller will process the data that fall within the definitions of art. 4(1) of the Regulations collected during the execution of the mandate/ supply contract, including, for example: name, surname, mobile phone number, e-mail address and in general the contact details of your referent person, hereinafter referred to as "Personal Data".
We process the personal data of visitors and customers of our websites www.pasisrl.it and www.pndshop.it, as well as emails. We collect and process personal data to complete orders, including names, contact information, address details and possibly payment data. In addition, we collect data through cookies and similar tracking technologies to monitor visitor behavior on our websites and in respect of email messages, so that we can improve the visitor experience. We also use personal data collected for legitimate marketing purposes.
We use Google Analytics to track traffic on our websites.
Your Personal Data will be processed, with your specific consent where necessary, for the following purposes:
The legal bases of the processing for the purpose a) and b) are respectively art. 6(1)(b) and 6(1)(c) of the Regulation.
Providing your Personal Data for the purposes indicated above is optional, but by default it will not be possible to execute the mandate/ supply agreement.
Your Personal Data may be shared with:
Personal data will not be transferred to a Data Controller of a third Country without prior verification of an adequacy decision of the Commission or after the adoption of appropriate guarantees by the third party;
Your Personal Data will be stored for the time necessary for the performance of the services provided in the mandate/ supply contract and for the period indicated by law. It shall in any event be subject to the subsequent retention provided for by the applicable law, including that provided for in Art. 2946.
The data subject has the right to: access personal data, request its rectification or cancellation or restriction of processing; object to processing; obtain data portability. You also have the right to withdraw your consent at any time without prejudice to the lawfulness of the processing or the right to lodge a complaint with a supervisory authority.
Requests should be sent in writing to the Data Controller at the following address: Via Galliari 5/e - 10125 Torino or by e-mail firstname.lastname@example.org.
In any case, you always have the right to lodge a complaint with the competent supervisory authority (Data Protection Authority), pursuant to art. 77 of the Regulation, if you believe that the processing of your data is contrary to the legislation in force.
Cookies are small text files that are placed on your computer by websites that you visit. They contain basic information about Internet browsing and thanks to the browser are recognized every time the user visits the site.
Activities strictly necessary for the operation
These cookies are technical in nature and allow the site to function properly. For example, they keep the user logged in while browsing, preventing the site from requiring multiple links to access the next pages.
ASP.NET Session for login management
CART.SESSION for cart management
SKIN STYLE for skin management
Activities of saving preferences
These cookies allow you to remember the preferences selected by the user while browsing, for example, allow you to set the language.
Statistics and audience measurement activities
These cookies help us to understand, through data collected in anonymous and aggregate form, how users interact with our websites providing information about the sections visited, the time spent on the site, any malfunctions. This helps us to improve the performance of our websites.
Third party profiling cookies
We use a variety of providers who can in turn install cookies for the proper functioning of the services they are providing. If you would like information about these third-party cookies and how to disable them, please access the links in the tables below.
Third Party Audience Measurement and Statistics Cookies
Cookie of social media sharing
These third-party cookies are used to integrate some widespread features of the main social media and provide them within the site. In particular, they allow the registration and authentication on the site via facebook and google connect, the sharing and comments of pages of the site on social media, enable the features of "like" on Facebook and "+1" on G+.
Cookies can be fully disabled by the browser with the appropriate function provided in most browser programs.
It is worth knowing, however, that by disabling cookies some of the features of the website may not be usable.
Here are the links to the information of the main browsers for more information on disabling cookies: Chrome, Firefox, Safari, Edge.